For Modela MDX-15E / MDX-20E

Tools and Accessories for Modela MDX-15E / MDX-20E

Modela MDX-15E

Tools and Accessories for Modela MDX-15E / MDX-20E

Machine Tools and Accessories

See our range of tools and accessories below.

Tools, Adaptors & Sacrificial Beds

Modelas have a 6mm dia spindle. However, for most general operations TechSoft recommend the use of 4.36mm (11/64 inch) extended shank tools. These are simply inserted into the machine spindle using a TechSoft tool adaptor. Tools can then be lowered onto the work surface, thus datuming the tool automatically. Adaptors can remain on the tool to allow them to be easily removed and replaced without the need for re-datuming. Two 4.36mm adaptors are supplied by TechSoft with the machine. Extra adaptors are available as follows:

Products	Price	Buy
Adaptors for 3.17mm tools (pack of 3) Order Code: TA-ADAPT-M3	£37.00
Adaptors for 4.36mm tools (pack of 3) Order Code: TA-ADAPT-M4	£37.00
1.5mm Hex Tool for spindle grub screws Order Code: TA-HEXTOOL15	£4.60
2mm Hex Tool for adaptor adjustment Order Code: TA-HEXTOOL20	£4.60
White HIPS Styrene, 148 x 98 x 5mm Order Code: TC-MDX15-BED	£3.40
White HIPS Styrene, 198 x 148 x 5mm Order Code: TC-MDX20-BED	£7.10

Tool Packs

Products	Price	Buy
Mixed Tool Pack (General set of tools) (Save £5) (TA-ADAPT-M4, TA-ECT4M-40, TA-SD4M-2, TA-SD4M-4, TABN4M-2) Order Code: TP-MIX-15/20E	£196.00
PCB Tool Pack (Specialist PCB tools) (Save £5) (TA-ADAPT-M3, TA-ADAPT-M4, TA-ECT4M-40, TA-SD4M-2, TAPD3M-0.8, TA-PD3M-1) Order Code: TP-PCB-15/20E	£165.00

Engraving Tools

General purpose carbide tipped vee point engraving tools, ground to an included angle of 40 deg. Suitable for engraving most materials, and recommended as a standard tool for all users.

Products	Price	Buy
40deg, 4.36mm (shank diameter), 90mm (overall length) Order Code: TA-ECT4M-40	£36.00
Replacement re-sharpened engraving tool (N.B. Engraving Tool must be returned to TechSoft) Order Code: TA-ECT-REPLACE	£10.60

Slot Drills

General purpose milling/drilling slot drills in solid carbide. These tools (particularly in sizes 2mm and above) are specially designed to produce a good surface finish on plastic materials such as styrene and acrylic.

Products	Price	Buy
0.5mm (tip diameter), 3mm (flute length), 4.36mm (shank diameter), 80 (overall length) Order Code: TA-SD4M-0.5	£65.00
0.8mm (tip diameter), 4mm (flute length), 4.36mm (shank diameter), 90mm (overall length) Order Code: TA-SD4M-0.8	£36.00
1mm (tip diameter), 5mm (flute length), 4.36mm (shank diameter), 90mm (overall length) Order Code: TA-SD4M-1	£42.00
1.5mm (tip diameter), 5mm (flute length), 4.36mm (shank diameter), 90mm (overall length) Order Code: TA-SD4M-1.5	£42.00
2mm (tip diameter), 6mm (flute length), 4.36mm (shank diameter), 90mm (overall length) Order Code: TA-SD4M-2	£28.00
2.5mm (tip diameter), 8mm (flute length), 4.36mm (shank diameter), 90mm (overall length) Order Code: TA-SD4M-2.5	£36.00
3mm (tip diameter), 12mm (flute length), 4.36mm (shank diameter), 100mm (overall length) Order Code: TA-SD4M-3	£36.00
4mm (tip diameter), 15mm (flute length), 4.36mm (shank diameter), 100mm (overall length) Order Code: TA-SD4M-4	£65.00

Ball Nosed Cutters

General purpose round ended cutters in carbide. They are ideal for 3D modelling, particularly in modelling wax or foam.

Products	Price	Buy
2mm (tip diameter), 6mm (flute length), 4.36mm (shank diameter), 85mm (overall length) Order Code: TA-BN4M-2	£37.00
3mm (tip diameter), 7mm (flute length), 4.36mm (shank diameter), 90mm (overall length) Order Code: TA-BN4M-3	£41.00
4mm (tip diameter), 7mm (flute length), 4.36mm (shank diameter), 100mm (overall length) Order Code: TA-BN4M-4	£60.00

Printed Circuit Board Drills

A range of solid carbide PCB drills. These must be used in conjunction with the 3.17mm tool adaptor (TA-ADAPT-M3, see above).

Products	Price	Buy
Pack of 5 Drills: 0.8mm (td), 10mm (fl), 3.17mm (sd), 38mm (ol) Order Code: TA-PD3M-0.8	£17.30
Pack of 5 Drills: 1mm (td), 10mm (fl), 3.17mm (sd), 38mm (ol) Order Code: TA-PD3M-1	£17.30
Pack of 5 Drills: 1.2mm (td), 10mm (fl), 3.17mm (sd), 38mm (ol) Order Code: TA-PD3M-1.2	£17.30
Pack of 5 Drills: 1.5mm (td), 10mm (fl), 3.17mm (sd), 38mm (ol) Order Code: TA-PD3M-1.5	£17.30