For EGX-20, PNC-2000/2100/2200, MDX-3

Tools and Accessories for EGX-20, PNC-2000/2100/2200, MDX-3

Roland EGX-20

Roland PNC-2000

Roland MDX-3

Tools and Accessories for EGX-20, PNC-2000/2100/2200, MDX-3

Machine Tools and Accessories

See our range of tools and accessories below.

Collets

For EGX-20, PNC-2000/2100/2200

When using more than one tool, the upper collet (if left on the cutter) can act as a depth stop. This makes setup very quick and simple. Extra collets are available as follows:

Products	Price	Buy
Upper collets for 3.17mm tools (pk of 2) Order Code: TA-MOD-COLLET	£18.60

Modela MDX-3 Tools

The standard Modela MDX-3 spindle takes tools of 6mm shank diameter. TechSoft have designed an alternative spindle which takes 3.17mm (1/8 inch) diameter tooling. This system also has the advantage of using an upper collet which can be used as a depth stop, thus allowing much easier tool interchange. (One spindle adaptor and one upper collet are supplied free with each machine.) Extra collets and spindle adaptors are available as follows:

Products	Price	Buy
Upper collets for 3.17mm tools (pk of 2) Order Code: TA-MOD-COLLET	£18.60

Engraving Tools (40 deg)

General purpose carbide tipped vee point engraving tools, ground to an included angle of 40 deg. Suitable for engraving most materials, and recommended as a standard tool for all users.

Products	Price	Buy
40°, 3.17mm (shank diameter), 120mm (overall length) Order Code: TA-EC3-40	£38.00
Replacement re-sharpened engraving tool (N.B. Engraving Tool must be returned to TechSoft) Order Code: TA-ECT-REPLACE	£10.60

Slot Drills

General purpose milling/drilling slot drills in solid carbide. These tools (particularly in sizes 2mm and above) are specially designed to produce a good surface finish on plastic materials such as styrene and acrylic, and non-ferrous metals such as aluminium. Due to their superior cutting action, they also run quieter than routing cutters. The drawback is a slightly smaller depth of cut compared to the equivalent router cutter, the flute length being typically 3 to 4 times the diameter.

Products	Price	Buy
0.8mm (tip diameter), 4mm (flute length), 3.17mm (shank diameter), 140mm (overall length) Order Code: TA-SD3-0.8	£49.00
1mm (tip diameter), 5mm (flute length), 3.17mm (shank diameter), 135mm (overall length) Order Code: TA-SD3-1	£49.00
1.5mm (tip diameter), 5mm (flute length), 3.17mm (shank diameter), 135mm (overall length) Order Code: TA-SD3-1.5	£49.00
2mm (tip diameter), 6mm (flute length), 3.17mm (shank diameter), 135mm (overall length) Order Code: TA-SD3-2	£50.00
2.5mm (tip diameter), 8mm (flute length), 3.17mm (shank diameter), 135mm (overall length) Order Code: TA-SD3-2.5	£52.00
3mm (tip diameter), 12mm (flute length), 3.17mm (shank diameter), 135mm (overall length) Order Code: TA-SD3-3	£54.00

Ball Nosed Cutters

General purpose round ended cutters in carbide. They are ideal for 3D modelling, particularly in modelling wax or foam.

Products	Price	Buy
2mm (tip diameter), 6mm (flute length), 3.17mm (shank diameter), 125mm (overall length) Order Code: TA-BN3-2	£38.00

Printed Circuit Board Drills

A range of specialist PCB drills in tungsten carbide.

Products	Price	Buy
0.8mm (tip diameter), 10mm (flute length), 3.17mm (shank diameter), 120mm (overall length) Order Code: TA-PD3-0.8	£37.00
1mm (tip diameter), 10mm (flute length), 3.17mm (shank diameter), 120mm (overall length) Order Code: TA-PD3-1	£37.00
1.2mm (tip diameter), 10mm (flute length), 3.17mm (shank diameter), 120mm (overall length) Order Code: TA-PD3-1.2	£37.00
1.5mm (tip diameter), 10mm (flute length), 3.17mm (shank diameter), 120mm (overall length) Order Code: TA-PD3-1.5	£37.00

Half Round Routing Cutters

Good general purpose tools for milling/drilling/routing in materials such as plastic and wood. Carbide tipped. The straight flute does not clear swarf very efficiently, thus care must be taken with deeper cuts.

Products	Price	Buy
2mm (tip diameter), 5mm (flute length), 3.17mm (shank diameter), 115mm (overall length) Order Code: TA-RC3-50-2	£38.00
3mm (tip diameter), 10mm (flute length), 3.17mm (shank diameter), 115mm (overall length) Order Code: TA-RC3-50-3	£38.00

Three Quarter Round Routing Cutters

Similar to the half round cutters, but slightly more inclined to clogging. However, they are very strong and relatively difficult to break if accidentally overloaded.

Products	Price	Buy
2mm (tip diameter), 5mm (flute length), 3.17mm (shank diameter), 115mm (overall length) Order Code: TA-RC3-75-2	£46.00
3mm (tip diameter), 10mm (flute length), 3.17mm (shank diameter), 115mm (overall length) Order Code: TA-RC3-75-3	£46.00