TechSoft Support Zone

Periodic Cleaning Instructions

After every output:

1. Vacuum the machine on a regular basis, cleaning away any little loose grainy bits of material after outputting. Make sure to vacuum both the front and back rails as best as you can.

Periodically (every week if used sparingly, or every day if used constantly):

1. Clean away any material you can find within the grooves of both the front and back rails using the little brush provided (see front of picture).
   
2. After cleaning away all visible material from between the grooves, apply just a little dab of the grease (see front of picture) to the centre of both the front and back rails. Move the machine to the far left and then the far right in the X-direction using the “iModela Controller”, this allows the grease to spread evenly across the whole rail.

Article Date: 07/03/2024

In this section of our website you will find basic support articles for a range of TechSoft's software and machines. If you cannot find what you are looking for, please contact us on 01745 535007 or email us on sales@techsoft.co.uk