TechSoft Logo
TechSoft UK Ltd., Falcon House, Royal Welch Avenue,
Bodelwyddan, Denbighshire, LL18 5TQ
Tel: 01745 535007 | Email: sales@techsoft.co.uk
01745 535007
sales@techsoft.co.uk
CAD/CAM · Textiles · Machinery · Tools · Materials · Installations
Facebook X (Twitter) YouTube Instagram
You are here: Home > TechSoft Support Zone > LaserCAM GT > Transferring a File to the LaserCAM GT via USB Stick

TechSoft Support Zone


Transferring a File to the LaserCAM GT via USB Stick


From TechSoft Design V3
There is currently no way to transfer a file to the LaserCAM GT from TechSoft Design V3 via USB stick. This is a process that most schools would want to avoid due to IT policies restricting the use of USB sticks.

From RDWorks / LaserCAM GT Studio / Lightburn
You can transfer files via USB stick from RD Works/LaserCAM GT Studio, and from Lightburn.

  1. First create your design as normal in the software.

    From RD Works/LaserCAM GT Studio: In the bottom right of the screen, click on “SaveToUFile”. This creates a “.rd” file which you can save onto a USB stick.

    From Lightburn: Go to “File > Save RD File”. This creates a “.rd” file which you can save onto a USB stick.

  2. Insert the USB stick into the laser cutter

  3. You can then load in the ".rd" file into the LaserCAM GT by the process explained in the video below.



    (This video is created by a third party. TechSoft are not responsible for any errors in the content).



Article Date: 16/01/2024


In this section of our website you will find basic support articles for a range of TechSoft's software and machines. If you cannot find what you are looking for, please contact us on 01745 535007 or email us on sales@techsoft.co.uk