TechSoft Logo
TechSoft UK Ltd., Falcon House, Royal Welch Avenue,
Bodelwyddan, Denbighshire, LL18 5TQ
Tel: 01745 535007 | Email:
01745 535007
CAD/CAM · Textiles · Machinery · Tools · Materials · Installations
Facebook X (Twitter) YouTube Instagram
You are here: Home > TechSoft Support Zone > Software - TechSoft Design V3 > How to Extend a Line to Meet Another Line

TechSoft Support Zone

How to Extend a Line to Meet Another Line


How do I extend a line so that it accurately meets another line?


There is no ‘extend to meet’ command as such, but the result that you want can be achieved as follows:

  1. Select the line to extend and click Start Edit (bottom right hand corner)

  2. Click on the red dot with the right hand mouse button.

  3. Move the mouse to extend the line past the line you wish to meet then click the right button again.

  4. Select End Edit (bottom right hand corner) and click off the line to de-select it.

  5. Finally use Delete Part to delete the part of the line that you do not want.

Article Date: 08/11/2020

In this section of our website you will find basic support articles for a range of TechSoft's software and machines. If you cannot find what you are looking for, please contact us on 01745 535007 or email us on