Loading...
 |
| SRM-20E |
The SRM-20 is supplied with a 6mm Roland collet. However, for most general operations TechSoft recommend the use of 4.36mm (1/8 inch) extended shank tools. These are simply inserted into the Roland collet using a TechSoft tool adaptor. Tools can then be lowered onto the work surface, thus datuming the tool automatically. Adaptors can remain on the tool to allow them to be easily removed and replaced without the need for re-datuming. Two 4.36mm adaptors are supplied by TechSoft with the machine and adaptors are also available to fit 3.17mm (1/8 inch) tools, such as standard PCB drills. For deep 3D machining, the 6mm Roland collet allows the use of any of the Extended Long Reach Modelling tools listed below.
| Products | Price | Buy |
6mm Roland collet (replacement) Order Code: RLP-SRM20-COLL6 | £70.00 | |
Adaptors for 3.17mm tools (pack of 3) Order Code: TA-ADAPT-M3 | £37.00 | |
Adaptors for 4.36mm tools (pack of 3) Order Code: TA-ADAPT-M4 | £37.00 | |
2mm Hex Tool for adaptor adjustment Order Code: TA-HEXTOOL20 | £3.90 | |
White Styrene Sacrificial Bed for SRM-20 Order Code: TC-SRM20-BED | £7.10 |
| Products | Price | Buy |
Mixed Tool Pack (General set of tools) (Save £5) (TA-ADAPT-M4, TA-ECT4MP-40, TA-SD4MP-2, TA-SD4MP-4, TA-BN4MP-2) Order Code: TP-MIX-SRM20E | £186.00 | |
3D Tool Pack (Specialist 3D tools) (Save £7) (TA-SD6LR-2, TA-SD6LR-4, TA-BN6Lr-2, TA-BN6LR-4) Order Code: TP-3D-40E | £199.00 | |
PCB Tool Pack (Specialist 3D tools) (Save £5) (TA-ADAPT-M3, TA-ADAPT-M4, TA-ECT4MP-40, TA-SD4MP-2, TA-PD3M-0.8, TA-PD3m-1) Order Code: TP-PCB-SRM20E | £160.00 |
General purpose carbide tipped vee point engraving tools, ground to an included angle of 40 deg. Suitable for engraving most materials, and recommended as a standard tool for all users.
| Products | Price | Buy |
40 deg, 0.3mm (td), 4.36mm (sd), 65mm (ol) Order Code: TA-ECT4MP-40 | £30.00 | |
Replacement re-sharpened engraving tool (N.B. Engraving Tool must be returned to TechSoft) Order Code: TA-ECT-REPLACE | £9.80 |
Solid carbide vee point slot drill with an included angle of 90 degrees. This tool is ideal for VCarving, PhotoVCarving and cutting 45 degree chamfers.
| Products | Price | Buy |
VCarving Tool 90deg, 5mm (tip diameter), 12mm (flute length), 6mm (shank diameter), 50mm (overall length) Order Code: TA-VC6-90 | £52.00 |
General purpose milling/drilling slot drills in solid carbide. These tools (particularly in sizes 2mm and above) are specially designed to produce a good surface finish on plastic materials such as styrene and acrylic.
| Products | Price | Buy |
0.5mm (td), 3mm (fl), 4.36mm (sd), 60mm (ol) Order Code: TA-SD4MP-0.5 | £65.00 | |
0.8 (td), 4mm (fl), 4.36mm (sd), 60mm (ol) Order Code: TA-SD4MP-0.8 | £34.00 | |
1mm (td), 5mm (fl), 4.36mm (sd), 60mm (ol) Order Code: TA-SD4MP-1 | £42.00 | |
1.5mm (td), 5mm (fl), 4.36mm (sd), 60mm (ol) Order Code: TA-SD4MP-1.5 | £42.00 | |
2mm (td), 6mm (fl), 4.36mm (sd), 60mm (ol) Order Code: TA-SD4MP-2 | £28.00 | |
2.5mm (td), 8mm (fl), 4.36mm (sd), 60mm (ol) Order Code: TA-SD4MP-2.5 | £34.00 | |
3mm (td), 12mm (fl), 4.36mm (sd), 70mm (ol) Order Code: TA-SD4MP-3 | £34.00 | |
4mm (td), 15mm (fl), 4.36mm (sd), 85mm (ol) Order Code: TA-SD4MP-4 | £61.00 |
A range of long reach carbide slot drills mounted in an extended shank for ease of use. Ideal for very deep machining, particularly when profiling in 3D.
| Products | Price | Buy |
2mm (tip diameter), 8mm (flute length), 6mm (shank diameter), 100mm (overall length) Order Code: TA-SD6LR-2 | £58.00 | |
3mm (tip diameter), 20mm (flute length), 6mm (shank diameter), 115mm (overall length) Order Code: TA-SD6LR-3 | £60.00 | |
4mm (tip diameter), 25mm (flute length), 6mm (shank diameter), 115mm (overall length) Order Code: TA-SD6LR-4 | £58.00 |
General purpose round ended cutters in carbide. They are ideal for 3D modelling, particularly in modelling wax or foam.
| Products | Price | Buy |
2mm (td), 6mm (fl), 4.36mm (sd), 65mm (ol) Order Code: TA-BN4MP-2 | £37.00 | |
3mm (td), 7mm (fl), 4.36mm (sd), 70mm (ol) Order Code: TA-BN4MP-3 | £41.00 | |
4mm (td), 7mm (fl), 4.36mm (sd), 70mm (ol) Order Code: TA-BN4MP-4 | £60.00 |
A range of long reach carbide ball nosed cutters mounted in an extended shank for ease of use. Ideal for very deep machining, particularly when profiling in 3D.
| Products | Price | Buy |
2mm (tip diameter), 6mm (flute length), 6mm (shank diameter), 100mm (overall length) Order Code: TA-BN6LR-2 | £38.00 | |
3mm (tip diameter), 20mm (flute length), 6mm (shank diameter), 115mm (overall length) Order Code: TA-BN6LR-3 | £52.00 | |
4mm (tip diameter), 20mm (flute length), 6mm (shank diameter), 115mm (overall length) Order Code: TA-BN6LR-4 | £53.00 |
A range of solid carbide PCB drills. These must be used in conjunction with the 3.17mm tool adaptor (TA-ADAPT-M3, see above).
| Products | Price | Buy |
Pack of 5 Drills: 0.8mm (td), 10mm (fl), 3.17mm (sd), 38mm (ol) Order Code: TA-PD3M-0.8 | £17.30 | |
Pack of 5 Drills: 1mm (td), 10mm (fl), 3.17mm (sd), 38mm (ol) Order Code: TA-PD3M-1 | £17.30 | |
Pack of 5 Drills: 1.2mm (td), 10mm (fl), 3.17mm (sd), 38mm (ol) Order Code: TA-PD3M-1.2 | £17.30 | |
Pack of 5 Drills: 1.5mm (td), 10mm (fl), 3.17mm (sd), 38mm (ol) Order Code: TA-PD3M-1.5 | £17.30 |
