Modelling Foam

This is an easy machining closed cell rigid foam, ideal for 3D prototyping and modelling. It can be machined at high speed with minimal tool wear. The foam is supplied in two densities. Low density foam allows rough models and prototyping at low cost. High density foam, with its greater structural strength and ability to hold surface detail, is ideal for finished models. The high density foam can also be used as a plug for vacuum forming, (painting is recommended to prevent the foam sticking to the styrene). The foam can also be used as a mould for low melting point alloys for applications such as jewellery manufacture.

Modelling foam is the first choice material for most 3D modelling in schools.

N.B. Due to the nature of the very fine dust produced by this material, vacuum extraction MUST be used on the RotoCAMM, CAMM 2 and all models of MODELA and CAMM 3, to prevent ingress into bearings and potential inhalation by operators.

Nominal size: 500 x 400mm (for Modela Pro II MDX-540E)

Products	Price	Buy
Low density foam 25mm. 6 blocks Order Code: TAFL5-25-6	£154.00
Low density foam 50mm. 3 blocks Order Code: TAFL5-50-3	£101.00
High density foam 25mm. 6 blocks Order Code: TAFH5-25-6	£275.00
High density foam 50mm. 3 blocks Order Code: TAFH5-50-3	£260.00

Nominal size: 400 x 305mm (for Modela MDX-50E)

Products	Price	Buy
Low density foam, 400 x 305 x 25mm, 6 blocks Order Code: TAFL8-25-6	£73.00
Low density foam, 400 x 305 x 50mm, 3 blocks Order Code: TAFL8-50-3	£120.00
High density foam, 400x 305 x 25mm, 6 blocks Order Code: TAFH8-25-6	£128.00
High density foam, 400x 305 x 50mm, 3 blocks Order Code: TAFH8-50-3	£121.00

Nominal size: 305 x 305mm (for RotoCAMM MDX-40AE / 40E)

Products	Price	Buy
Low density foam 25mm. 10 blocks Order Code: TAFL4-25-10	£93.00
Low density foam 50mm. 5 blocks Order Code: TAFL4-50-5	£60.00
High density foam 25mm. 10 blocks Order Code: TAFH4-25-10	£160.00
High density foam 50mm. 5 blocks Order Code: TAFH4-50-5	£149.00

Nominal size: 305 x 195mm (for Self-Centering Vice, EGX-30E, Camm 2 PNC2300/A)

Products	Price	Buy
Low density foam 25mm. 12 blocks Order Code: TAFL7-25-12	£72.00
Low density foam 50mm. 6 blocks Order Code: TAFL7-50-6	£46.00
High density foam 25mm. 12 blocks Order Code: TAFH7-25-12	£120.00
High density foam 50mm. 6 blocks Order Code: TAFH7-50-6	£110.00

Nominal size: 200 x 150mm (for SRM-20E, Modela MDX-20E)

Products	Price	Buy
Low density foam 25mm. 24 blocks Order Code: TAFL2-25-24	£84.00
Low density foam 50mm. 12 blocks Order Code: TAFL2-50-12	£53.00
High density foam 25mm. 24 blocks Order Code: TAFH2-25-24	£134.00
High density foam 50mm. 12 blocks Order Code: TAFH2-50-12	£122.00

Nominal size: 150 x 100mm (for iModela MDX-15E)

Products	Price	Buy
Low density foam 25mm. 48 blocks Order Code: TAFL1-25-48	£93.00
Low density foam 50mm. 24 blocks Order Code: TAFL1-50-24	£58.00
High density foam 25mm. 48 blocks Order Code: TAFH1-25-48	£140.00
High density foam 50mm. 24 blocks Order Code: TAFH1-50-24	£122.00