TechSoft Logo
TechSoft UK Ltd., Falcon House, Royal Welch Avenue,
Bodelwyddan, Denbighshire, LL18 5TQ
Tel: 01745 535007 | Email:
01745 535007
CAD/CAM · Textiles · Machinery · Tools · Materials · Installations
Facebook Twitter YouTube Instagram
You are here: Home > Products > Knife Cutting > Water Release Transfer Paper

Water Release Transfer Paper

Knife Cutting Materials

Water release transfer paper is ideal for producing decals on non-porous, smooth surfaces, such as ceramics, glass, candles, and plastic. The image is printed onto the transfer paper using a TMT laser printer and then cut using a knife cutting system. It can be used with nearly any CAMM 1, STIKA or Craft ROBO. Once printed, the water release transfer paper is aligned in the machine either automatically (GX-24E, CX-24EO or the Craft ROBO - TS), or manually (this is made easier by using the TechSoft Alignment Guide supplied in Training Packs). Once cut the paper is placed in water and the transfer is removed from its backing. Position the transfer onto the substrate removing any bubbles and wrinkles with a decal kidney (see below). Allow the transfer to dry for a minimum of 3 hours. If applied onto ceramic or glass the transfer can be cured by placing the object into an oven for 3 minutes at 180°C.

Water release transfer paper is available in clear (C) and white (W) A4 sheets.

10 A4 sheets water release transfer paper
Order Code: TAWRP-10-CW
50 A4 sheets water release transfer paper
Order Code: TAWRP-50-CW
Decal Kidney (rubber squeegee) (For applying Water Release Transfers)
Order Code: TAWR-DK