TechSoft Logo
TechSoft UK Ltd., Falcon House, Royal Welch Avenue,
Bodelwyddan, Denbighshire, LL18 5TQ
Tel: 01745 535007 | Email:
01745 535007
CAD/CAM · Textiles · Machinery · Tools · Materials · Installations
Facebook Twitter YouTube Instagram
You are here: Home > Products > Knife Cutting > Ceramicon Transfers

Ceramicon Transfers

Knife Cutting Materials

Ceramicon Transfer Mug

Designs have been put on ceramics by ‘wet transfer’ for many years. Now, with TechSoft Ceramicon transfer material you can create designs using the CAMM 1, ColorCAMM, VersaCAMM, TrueVIS, STIKA or Craft ROBO - TS. Simply cut as if cutting vinyl, then place the sheet in a bowl of water. After about 20 seconds the image may be floated off the paper and onto the article to be glazed. Leave to dry then fire in a kiln. The process works with ceramic tiles or ready made ‘white ware’- including mugs, plates, etc. Once fired the transfer becomes part of the object and is dishwasher proof. It can also be used to enamel jewellery.

Ceramicon is available in sheets, in a range of colours.

N.B. Colours shown are only an indication.

Black Red Orange Yellow Dark
Green Brown Dark
Mixed pack of 10 Ceramicon sheets. Two black, one of each other colour.
Order Code: TA-CER-MIX
Pack of 10 Ceramicon sheets. All same standard colour.
Order Code: TA-CER-COL
Ceramicon Sheet

Nominal sheet size: 445 x 303mm (allowing for pinch rollers) Usuable material size: 340 x 240mm (approx.)