TechSoft Logo
TechSoft UK Ltd., Falcon House, Royal Welch Avenue,
Bodelwyddan, Denbighshire, LL18 5TQ
Tel: 01745 535007 | Email: sales@techsoft.co.uk
01745 535007
sales@techsoft.co.uk
CAD/CAM · Textiles · Machinery · Tools · Materials · Installations
Facebook Twitter YouTube Instagram
You are here: Home > Products > 3D Printing > Materials and Accessories > Stratasys Mojo 3D Printer

Stratasys Mojo 3D Printer

Materials and Accessories

Official Stratasys Material and Bases
Model Material
Model Material Spools and cassettes are not interchangeable so it is essential to select the right material for your machine. Material is supplied in sealed bags. ABS will absorb moisture from the atmosphere so always re-seal bags if part-used spools are to be stored. It is worth noting the quantity of material being ordered and the cost. The Mojo software predicts the amount of material needed so this figure can be used to determine individual part costs.
ProductsPriceBuy
Mojo Quick Pack Model Print Engine (1311cc). Available in ivory, nectarine, red, yellow, olive green, blue, white, steel grey or black
Order Code: TMP-MJM-COL
£440.00
Support Material
Most parts will use less support material than model material, but the proportion will vary depending on the model and the chosen build-strategy. One support spool for every three/four model spools should be about right.
ProductsPriceBuy
Mojo Quick Pack Support Print Engine (1311cc)
Order Code: TMP-MJM-SUP
£405.00
Model Bases
Models are created by building up from one of these disposable, slot-in bases. A new base should be used for every build to ensure the model has a firm grip and can’t move, curl or part-company with the base during the build. For economy, it is possible to position smaller parts to use a clean area of an already-used model base. Re-using bases is not recommended and can be a false economy. If a model does ‘lift’ then the build will almost certainly be lost.
ProductsPriceBuy
24 Plastic Bases for Mojo (127 x 127mm)
Order Code: TMP-MJ-BASE
£97.00
Machine Repairs
Inspection and Diagnosis
If your machine is experiencing issues, please first send detailed information to support@techsoft.co.uk as we may be able to diagnose the problem by email.

If we are not able to diagnose the problem, or if the machine needs repair, it is most cost effective to send the machine to be repaired by a Stratasys qualified engineer. The prices below are for an initial inspection and diagnosis only and exclude full labour and parts costs. Shipping must either be arranged by yourselves, or TechSoft can arrange the collection and return to you via a courier. You will need to strap the machine safely to a pallet ready for collection in either case.

Option 1: Customer arranges shipping at own expense
ProductsPriceBuy
Inspection and Diagnosis by Stratasys Engineer. Labour for minor repairs included. Cost of replacement parts not included.

Following the Inspection an accurate quote will be provided for a full repair if necessary.

Shipping to and from the repair centre in Oxfordshire to be arranged by the customer.

90 day warranty for replaced parts only
Order Code: REPAIR-LS-RTB
£395.00
Option 2: We collect the machine (UK Mainland only)
ProductsPriceBuy
Collect and Return for Inspection and Diagnosis by Stratasys Engineer. Labour for minor repairs included. Cost of replacement parts not included.

Following the inspection an accurate quote will be provided for a full repair if necessary.

Shipping both ways arranged by TechSoft. Customer to secure machine to a pallet ready for collection.

90 day warranty on replaced parts only.
Order Code: REPAIR-LS-DEL
£850.00