TechSoft Logo
TechSoft UK Ltd., Falcon House, Royal Welch Avenue,
Bodelwyddan, Denbighshire, LL18 5TQ
Tel: 01745 535007 | Fax: 01745 535008 | Email: sales@techsoft.co.uk
TechSoft Home Page
01745 535007       sales@techsoft.co.uk
CAD/CAM · Textiles · Machinery · Tools · Materials · Installations
TechSoft Home Page
01745 535007 sales@techsoft.co.uk
You are here: Products > Workshop Equipment > Heat Treatment

Heat Treatment

Brazing Hearths / Chip Forges / Furnaces / Benches

Flamefast Brazing Hearth

DS400 Single/DS400D Double
DS400 Single (left), DS400D Double (right)

Shown with extraction canopy (supplied separately)
DS400 and DS400D brazing hearths feature large 0.4 square metre refractory bases with insulated sides to prevent flame spillage. Both models use the same whisper quiet integral fan unit and feature comprehensive interlocking to prevent flaring or gas leakage in the event of power failure. Each hearth is supplied with an RF80 brazing torch capable of delivering up to 80,000 BTU. Torches have electronic ignition and single hand wheel control for adjusting the flame size whilst maintaining a consistent flame pattern. Fine-flame RF10 Jewellery torches can be supplied in addition to, or instead of, the general purpose RF80 model. The brazing hearths are based on well-proven Flamefast technology and have a well-deserved reputation for low-maintenance, safety and reliability.

N.B. Requires additional Heat Treatment Extraction.
Specifications
Model: Single Double
Gas Type: Natural Gas, Propane or Butane
Dimensions (with Canopy): 730(W) x 700(D) x 1800(H)mm 1500(W) x 700(D) x 1800(H)mm
Dimensions (without Canopy): 730(W) x 700(D) x 1192(H)mm 1500(W) x 700(D) x 1192(H)mm
Weight: 112kg 215kg
Power Requirements: 240V 1A, Fused switch-disconnector (metal clad)

Flamefast Brazing Hearth/Chip Forge

DS430S Single/DS430D Double
DS430S Single (left), DS430D Double (right)

Shown with extraction canopy (supplied separately)
At the heart of each unit is a 340mm diameter forge bowl which uses ceramic chip technology to virtually eliminate surface scale -formation on metals. The maximum 1,500°C working temperature can be achieved within 15 minutes of lighting –sufficient for hot working ferrous metal bar up to 50mm diameter. Both single and double units employ the same whisper quiet integral fan and can be fuelled by natural or LPG bottled gas. Both gas and air supply are interlocked to prevent flaring or gas leakage. Alongside the forge unit are one (single) or two (double) refractory surfaces for brazing. Each is provided with an RF80 brazing torch featuring electronic ignition and single wheel control for flame adjustment. Fine-flame RF10 Jewellery torches can be supplied in addition to, or instead of, the general purpose RF80 model.

N.B. Requires additional Heat Treatment Extraction.
Specifications
Model: Single Double
Gas Type: Natural Gas, Propane or Butane
Dimensions (with Canopy): 1040(W) x 550(D) x 1800(H)mm 1400(W) x 550(D) x 1800(H)mm
Dimensions (without Canopy): 1040(W) x 550(D) x 1080(H)mm 1400(W) x 550(D) x 1080(H)mm
Weight: 100kg 133kg
Power Requirements: 240V 1A, Fused switch-disconnector (metal clad)

Flamefast Chip Forge

Flamefast Chip Forge
Shown with extraction canopy (supplied separately)
This unit features ceramic chip technology to virtually eliminate scale-formation on metals. The maximum 1,500°C working temperature can be achieved within 15 minutes of lighting –sufficient for hot working ferrous metal bar up to 50mm diameter. Air supply is by a whisper quiet integral fan, fuel can be natural or LPG bottled gas. Both gas and air supply are interlocked to prevent flaring or gas leakage.

Requires additional Heat Treatment Extraction.
Specifications
Model: Flamefast Chip Forge
Gas Type: Natural Gas, Propane or Butane
Dimensions (with Canopy): 720(W) x 560(D) x 1800(H)mm
Dimensions (without Canopy): 720(W) x 560(D) x 1080(H)mm
Weight: 133kg
Power Requirements: 240V 1A, Fused switch-disconnector (metal clad)

Flamefast Crucible Furnace

Flamefast Crucible Furnace
The CM450PB features a tilting crucible which, in most circumstances, will not need lifting when pouring. For larger moulding boxes, a lifting frame is available. This lifts the whole assembly and thus preserves protection to and from the white hot crucible. The furnace is usually placed on a Flamefast Raised Sand Tray which removes the need for a casting pit and provides a safer, more convenient working height for the operator.

Requires additional Heat Treatment Extraction.
Specifications
Model: Flamefast Crucible Furnace
Gas Type: Natural Gas, Propane or Butane
Crucible Capacity: Al 2.9kg
Cu/Zn 10kg
Dimensions: 630(W) x 330(D) x 330(H)mm
Weight: 28kg
Power Requirements: 240V 2A, Fused switch-disconnector (metal clad)

Flamefast Moulding Bench

Flamefast Moulding Bench
The Flamefast Moulding Bench is a robust unit designed to store up to 200kg of moulding sand and has many clever features to prevent sand spillage during moulding operations. Galvanised steel construction provides complete stability. The overall design and a tough stove enamelled finish, matches and complements other Flamefast gas equipment. The two part lid covers the bench when not in use and doubles as a store for moulding tools.
Specifications
Model: Flamefast Moulding Bench
Dimensions: 1210(W) x 570(D) x 765(H)mm

Flamefast Welding Bench

Flamefast Welding Bench
This welding bench is ideal for the manual welding requirements in the school or technical college workshop. The 6mm steel surface is provided with pre-cut holes for mounting jigs, fixtures and clamps (not included), making accurate positioning of the workpiece a hassle free affair. Options include a lockable drawer for storage of tools and consumables, side rack for torches and accessories, and bolt on side shelf with ample space for most types of welding equipment.

N.B. Requires additional Heat Treatment Extraction.
Specifications
Model: Flamefast Welding Bench
Dimensions: 1120(W) x 600(D) x 850(H)mm
Weight: 79kg

Prices (excluding VAT)

As installation costs form a significant part of the overall price and vary depending on circumstances, we need to carry out a site survey before quoting.

Please contact TechSoft to discuss your Heat Treatment requirements and to arrange a visit.