RotoCAMM TS-400E & Modela Pro MDX-500E/MDX-650E

Tools and Accessories for RotoCAMM TS-400E & Modela Pro MDX-500E/MDX-650E

Roland TS-400E

Roland MDX-500E

Roland MDX-650E

Tools and Accessories for RotoCAMM TS-400E & Modela Pro MDX-500E/MDX-650E

Machine Tools and Accessories

See our range of tools and accessories below.

Collets & Sacrificial Beds

These models were supplied with both TechSoft 6mm and 1/4 inch collets. The collets allow the use of standard 6mm shank engineering tools and 1/4 inch woodworking router cutters.

Another option is to use a tool adaptor (TA-ADAPT-M3 or TA-ADAPT-M4) in conjunction with any of the 3.17mm, or 4.36mm shank tooling available for either the RotoCAMM MDX-40E or the MODELA MDX-15E/20E. The adaptor/tool assembly can then be held in a 6mm collet. This allows the use of a wide range of tooling for activities as diverse as deep 3D machining and PCB engraving and drilling. A locating ring attachment allows 6mm tools to be removed and replaced into the machine without re-datuming (for 3.17mm and 4.36mm tools the adaptors serve the same purpose).

Products	Price	Buy
Fixed collet for 6mm dia. tools Order Code: TC-MDX500-COLLETM	£34.00
Fixed collet for 1/4 inch dia. tools Order Code: TC-MDX500-COLLETI	£34.00
Collet nut Order Code: TC-MDX500-COLLETN	£17.30
Pack of 3 Locating Ring to fit 6mm tools Order Code: TA-M6-LOCRING	£33.00
Adaptors for 3.17mm tools (pack of 3) Order Code: TA-ADAPT-M3	£37.00
Adaptors for 4.36mm tools (pack of 3) Order Code: TA-ADAPT-M4	£37.00
2mm Hex Tool for adaptor adjustment Order Code: TA-HEXTOOL20	£4.60
White Styrene Sacrificial Bed for RotoCAMM TS-400 Order Code: TC-TS400-BED	£23.00

Engraving Tools

40 deg

General purpose carbide tipped vee point engraving tool, ground to an included angle of 40 deg. Suitable for engraving most materials.

Products	Price	Buy
40deg, 0.3mm tip, 6mm (shank diameter), 75mm (overall length) (Double ended) Order Code: TA-EC6-40	£57.00

90 deg

Solid carbide vee point slot drill with an included angle of 90 degrees. This tool is ideal for VCarving, PhotoVCarving and cutting 45 degree chamfers.

Products	Price	Buy
VCarving Tool 90deg, 5mm (tip diameter), 12mm (flute length), 6mm (shank diameter), 50mm (overall length) Order Code: TA-VC6-90	£61.00

Long Reach Modelling Slot Drills

A range of long reach carbide slot drills, ideal for deep 3D machining.

Products	Price	Buy
3mm (tip diameter), 20mm (flute length), 3mm (shank diameter), 55mm (overall length) Order Code: TA-SDE-3	£34.00*
4mm (tip diameter), 25mm (flute length), 4mm (shank diameter), 75mm (overall length) Order Code: TA-SDE-4	£36.00*
5mm (tip diameter), 25mm (flute length), 5mm (shank diameter), 75mm (overall length) Order Code: TA-SDE-5	£38.00*
6mm (tip diameter), 25mm (flute length), 6mm (shank diameter), 65mm (overall length) Order Code: TA-SDE-6	£46.00

Extended Long Reach Modelling Slot Drills

A range of long reach carbide slot drills. Ideal for very deep machining, particularly when profiling in 3D.

Products	Price	Buy
2mm (tip diameter), 8mm (flute length), 6mm (shank diameter), 75mm (overall length) Order Code: TA-SD6LR-2	£65.00
3mm (tip diameter), 20mm (flute length), 6mm (shank diameter), 90mm (overall length) Order Code: TA-SD6LR-3	£62.00
4mm (tip diameter), 25mm (flute length), 6mm (shank diameter), 90mm (overall length) Order Code: TA-SD6LR-4	£68.00

Long Reach Ball Nosed Modelling Cutters

A range of long reach carbide ball nosed cutters, ideal for deep 3D machining.

Products	Price	Buy
3mm (tip diameter), 20mm (flute length), 3mm (shank diameter), 55mm (overall length) Order Code: TA-BNE-3	£36.00*
4mm (tip diameter), 20mm (flute length), 4mm (shank diameter), 60mm (overall length) Order Code: TA-BNE-4	£37.00*
5mm (tip diameter), 20mm (flute length), 5mm (shank diameter), 60mm (overall length) Order Code: TA-BNE-5	£44.00*
6mm (tip diameter), 25mm (flute length), 6mm (shank diameter), 75mm (overall length) Order Code: TA-BNE-6	£50.00

Extended Long Reach Ball Nosed Modelling Cutters

A range of long reach carbide ball nosed cutters mounted in an extended shank for ease of use. Ideal for very deep machining, particularly when profiling in 3D.

Products	Price	Buy
2mm (tip diameter), 6mm (flute length), 6mm (shank diameter), 75mm (overall length) Order Code: TA-BN6LR-2	£38.00
3mm (tip diameter), 20mm (flute length), 6mm (shank diameter), 90mm (overall length) Order Code: TA-BN6LR-3	£52.00
4mm (tip diameter), 20mm (flute length), 6mm (shank diameter), 90mm (overall length) Order Code: TA-BN6LR-4	£44.00

High Hook Slot Drills

A range of carbide slot drills with tooth forms specially designed for rapid CNC machining in aluminium and plastics.

Products	Price	Buy
2mm (tip diameter), 6mm (flute length), 3mm (shank diameter), 38mm (overall length) Order Code: TA-SDEA-2	£28.00*
3mm (tip diameter), 12mm (flute length), 3mm (shank diameter), 38mm (overall length) Order Code: TA-SDEA-3	£30.00*
4mm (tip diameter), 12mm (flute length), 4mm (shank diameter), 50mm (overall length) Order Code: TA-SDEA-4	£33.00*
5mm (tip diameter), 20mm (flute length), 5mm (shank diameter), 50mm (overall length) Order Code: TA-SDEA-5	£38.00*
6mm (tip diameter), 20mm (flute length), 6mm (shank diameter), 60mm (overall length) Order Code: TA-SDEA-6	£38.00

Tool Descriptions

* The shank diameter of these tools is the same as the cutter diameter. Cutters with a shank other than 6mm will require a simple collar adaptor which may be made as follows: Cut a 6mm rod to a length of 20-25 mm. In a lathe, drill a suitable diameter hole through the length of the rod. Glue the collar onto the tool with epoxy resin adhesive (eg., Araldite).

Need Assistance?

If you would like to talk to us, please:

Call us: +44(0) 1745 535007
Email us: sales@techsoft.co.uk

All Milling / Routing / Engraving Tools and Accessories

For iModela iM-01

For SRM-20E

For RotoCAMM MDX-40AE/MDX-40E

For Modela MDX-50E

For Modela Pro II MDX-540E

For DE-3E, EGX-350E, TS-30E, EGX-300/E, PNC-2300/A

For RouterCAM

For Sieg CNC Mill

For Sieg CNC Lathe