Please Select a category:
This machine is supplied with a 6-7mm collet as
standard. However, for most general operations TechSoft
recommend the use of 4.36mm (11/64 inch) extended shank tools.
These are simply inserted into the machine spindle using a
TechSoft tool adaptor. Tools can then be lowered onto the work
surface, thus datuming the tool automatically. A locating ring
can remain on the tool to allow it to be easily removed and
replaced without the need for re-datuming. A 4.36mm adaptor and
two locating rings are supplied by TechSoft with the machine.
Alternatively the 6-7mm collet allows the use of standard 6mm
shank engineering tools and 1/4 inch woodworking router cutters.
Additional collets (TA-COLLET-D34 and TA-COLLET-D45) allow the
use of any of the Long Reach or High Hook tools listed below.
General purpose round ended cutters in carbide. They are ideal for 3D modelling, particularly in modelling wax or foam.
A range of long reach carbide ball nosed cutters, ideal for deep 3D machining.
A range of long reach carbide ball nosed cutters mounted in an extended shank for ease of use. Ideal for very deep machining, particularly when profiling in 3D.
General purpose milling/drilling slot drills in solid carbide. These tools (particularly in sizes 2mm and above) are specially designed to produce a good surface finish on plastic materials such as styrene and acrylic, and non-ferrous metals such as aluminium.
A range of long reach carbide slot drills. Ideal for deep 3D machining.
A range of long reach carbide slot drills. Ideal for very deep machining, particularly when profiling in 3D.
A range of carbide slot drills with tooth forms specially designed for rapid CNC machining in aluminium and plastics.
General purpose carbide tipped vee point engraving tools, ground to an included angle of 40 deg. Suitable for engraving most materials, and recommended as a standard tool for all users.
Solid carbide vee point slot drill with an included angle of 90 degrees. This tool is ideal for VCarving, PhotoVCarving and cutting 45 degree chamfers.
A range of specialist PCB drills in tungsten carbide.