TechSoft Logo
TechSoft UK Ltd., Falcon House, Royal Welch Avenue,
Bodelwyddan, Denbighshire, LL18 5TQ
Tel: 01745 535007 | Fax: 01745 535008 | Email: sales@techsoft.co.uk
01745 535007
sales@techsoft.co.uk
CAD/CAM · Textiles · Machinery · Tools · Materials · Installations
Facebook Twitter
You are here: Home > Products > Milling / Routing / Engraving > Milling / Routing / Engraving Tools & Accessories

Milling / Routing / Engraving Tools & Accessories

Please Select a category:


For EGX-20, PNC-2000/2100/2200, MDX-3

Roland EGX-20 Roland PNC-2000 Roland MDX-3
EGX-20 PNC-2000/2100/2200 MDX-3
Collets
For EGX-20, PNC-2000/2100/2200

When using more than one tool, the upper collet (if left on the cutter) can act as a depth stop. This makes setup very quick and simple. Extra collets are available as follows:

ProductsPriceBuy
Upper collets for 3.17mm tools (pk of 2)
Order Code: TA-MOD-COLLET
£18.60
Modela MDX-3 Tools

The standard Modela MDX-3 spindle takes tools of 6mm shank diameter. TechSoft have designed an alternative spindle which takes 3.17mm (1/8 inch) diameter tooling. This system also has the advantage of using an upper collet which can be used as a depth stop, thus allowing much easier tool interchange. (One spindle adaptor and one upper collet are supplied free with each machine.) Extra collets and spindle adaptors are available as follows:

ProductsPriceBuy
Upper collets for 3.17mm tools (pk of 2)
Order Code: TA-MOD-COLLET
£18.60
Engraving Tools (40 deg)
For Modela MDX-3

General purpose carbide tipped vee point engraving tools, ground to an included angle of 40 deg. Suitable for engraving most materials, and recommended as a standard tool for all users.

ProductsPriceBuy
40°, 3.17mm (shank diameter), 120mm (overall length)
Order Code: TA-EC3-40
£30.00
Replacement re-sharpened engraving tool
(N.B. Engraving Tool must be returned to TechSoft)
Order Code: TA-ECT-REPLACE
£8.50
Slot Drills

General purpose milling/drilling slot drills in solid carbide. These tools (particularly in sizes 2mm and above) are specially designed to produce a good surface finish on plastic materials such as styrene and acrylic, and non-ferrous metals such as aluminium. Due to their superior cutting action, they also run quieter than routing cutters. The drawback is a slightly smaller depth of cut compared to the equivalent router cutter, the flute length being typically 3 to 4 times the diameter.

ProductsPriceBuy
0.8mm (tip diameter), 4mm (flute length), 3.17mm (shank diameter), 140mm (overall length)
Order Code: TA-SD3-0.8
£49.00
1mm (tip diameter), 5mm (flute length), 3.17mm (shank diameter), 135mm (overall length)
Order Code: TA-SD3-1
£49.00
1.5mm (tip diameter), 5mm (flute length), 3.17mm (shank diameter), 135mm (overall length)
Order Code: TA-SD3-1.5
£49.00
2mm (tip diameter), 6mm (flute length), 3.17mm (shank diameter), 135mm (overall length)
Order Code: TA-SD3-2
£50.00
2.5mm (tip diameter), 8mm (flute length), 3.17mm (shank diameter), 135mm (overall length)
Order Code: TA-SD3-2.5
£52.00
3mm (tip diameter), 12mm (flute length), 3.17mm (shank diameter), 135mm (overall length)
Order Code: TA-SD3-3
£54.00
Ball Nosed Cutters

General purpose round ended cutters in carbide. They are ideal for 3D modelling, particularly in modelling wax or foam.

ProductsPriceBuy
2mm (tip diameter), 6mm (flute length), 3.17mm (shank diameter), 125mm (overall length)
Order Code: TA-BN3-2
£38.00
Printed Ciruit Board Drills

A range of specialist PCB drills in tungsten carbide.

ProductsPriceBuy
0.8mm (tip diameter), 10mm (flute length), 3.17mm (shank diameter), 120mm (overall length)
Order Code: TA-PD3-0.8
£37.00
1mm (tip diameter), 10mm (flute length), 3.17mm (shank diameter), 120mm (overall length)
Order Code: TA-PD3-1
£37.00
1.2mm (tip diameter), 10mm (flute length), 3.17mm (shank diameter), 120mm (overall length)
Order Code: TA-PD3-1.2
£37.00
1.5mm (tip diameter), 10mm (flute length), 3.17mm (shank diameter), 120mm (overall length)
Order Code: TA-PD3-1.5
£37.00
Routing Cutters
Half Round

Good general purpose tools for milling/drilling/routing in materials such as plastic and wood. Carbide tipped. The straight flute does not clear swarf very efficiently, thus care must be taken with deeper cuts.

ProductsPriceBuy
2mm (tip diameter), 5mm (flute length), 3.17mm (shank diameter), 115mm (overall length)
Order Code: TA-RC3-50-2
£30.00
3mm (tip diameter), 10mm (flute length), 3.17mm (shank diameter), 115mm (overall length)
Order Code: TA-RC3-50-3
£30.00
Three Quarter Round

Similar to the half round cutters, but slightly more inclined to clogging. However, they are very strong and relatively difficult to break if accidentally overloaded.

ProductsPriceBuy
2mm (tip diameter), 5mm (flute length), 3.17mm (shank diameter), 115mm (overall length)
Order Code: TA-RC3-75-2
£38.00
3mm (tip diameter), 10mm (flute length), 3.17mm (shank diameter), 115mm (overall length)
Order Code: TA-RC3-75-3
£38.00



Key Descriptions