TechSoft Logo
TechSoft UK Ltd., Falcon House, Royal Welch Avenue,
Bodelwyddan, Denbighshire, LL18 5TQ
Tel: 01745 535007 | Fax: 01745 535008 | Email: sales@techsoft.co.uk
TechSoft Home Page
01745 535007       sales@techsoft.co.uk
CAD/CAM · Textiles · Machinery · Tools · Materials · Installations
TechSoft Home Page
01745 535007 sales@techsoft.co.uk
You are here: Products > 3D Printing > 3D Printing Materials

3D Printing Materials

Please Select a 3D Printer:


Stratasys uPrint SE Plus

Model Material
Model MaterialSpools and cassettes are not interchangeable so it is essential to select the right material for your machine. Material is supplied in sealed bags. ABS will absorb moisture from the atmosphere so always re-seal bags if part-used spools are to be stored. It is worth noting the quantity of material being ordered and the cost. Catalyst software predicts the amount of material needed so this figure can be used to determine individual part costs.
Products Price Buy
Coloured ABS Spool (688cc) for uPrint SE Plus 3D Printer.
(Available in ivory, black, dark grey, red, blue, nectarine, fluorescent yellow, olive green, or white)
Order Code: TMP-USEPM-COL
£186.00
Pack of 5 Coloured Model Spools (688cc each) for uPrint SE Plus 3D Printer. Save £25.
(Available in ivory, black, dark grey, red, blue, nectarine, fluorescent yellow, olive green, or white).
Order Code: TMP-USEPM-COL5
£899.00
Support Material
Spools and cassettes are not interchangeable, BST support must not be used in SST machines and vice versa, so carefully check your machine model when ordering. Most parts will use less support material than model material, but the proportion will vary depending on the model and the chosen build-strategy. One support spool for every three/four model spools should be about right.
Products Price Buy
Soluble Support Spool (688cc) for uPrint SE and uPrint SE Plus
Order Code: TMP-USEM-SUP
£186.00
5 Soluble Support Spools (688cc) for uPrint SE and uPrint SE Plus. Save £25.
Order Code: TMP-USEM-SUP5
£899.00
Model Bases
Models are created by building up from one of these disposable, slot-in bases. A new base should be used for every build to ensure the model has a firm grip and can’t move, curl or part-company with the base during the build. For economy, it is possible to position smaller parts to use a clean area of an already-used model base. Re-using bases is not recommended and can be a false economy. If a model does ‘lift’ then the build will almost certainly be lost.
Products Price Buy
24 Plastic Bases for uPrint SE Plus (203 x 203mm)
Order Code: TMP-UPRP-BASE24
£120.00

Alternative Non-OEM Material Refills


As official Stratasys material can be increasing difficult to purchase for older 3D Printer models, we are now offering a refill / alternative to OEM materials which are 100% compatible with Stratasys 3D Printers.

This gives you the same or more material than the OEM product in a range of color assortments. Models which could not print colour before now can!

You will need to purchase a spool of material and an electrical chip for your 3D Printer model (you need a chip for each spool purchased).

You must keep your original used/empty material cassette! The spool of material and the electrical chip will need to be inserted into your used/empty cassette.
Model Material Refill
Products Price Buy
Coloured ABS Plus Refill for 922cc cartridge for the following models:

Dimension Elite, SST/BST 1200es, Fortus 250mc/200mc, uPrint, uPrint Plus, uPrint SE, uPrint SE Plus, HP Designjet 3D, HP Designjet Color 3D.

Available in Black, Blue, Green, Dark Grey, Grey, Ivory, Orange, Red, White Yellow/Orange, Yellow.

N.B. Requires appropriate chip to be ordered separately
Order Code: TMP-STRR1-COL
£345.00
Coloured ABS Plus Refill for 922cc cartridge for the following models:

Dimension SST/BST 1200, SST 768, BST 768.

Available in Black, Ivory, Red, White.

N.B. Requires appropriate chip to be ordered separately
Order Code: TMP-STRR2-COL
£265.00
Model Material Chips
Products Price Buy
Chip required for refill material in Dimension Elite, SST/BST 1200es, Fortus 200mc, Fortus 250mc
Order Code: TMP-STRR1-CHP1
£15.30
Chip required for refill material in uPrint, uPrint Plus
Order Code: TMP-STRR1-CHP2
£30.00
Chip required for refill material in uPrint SE, uPrint SE Plus
Order Code: TMP-STRR1-CHP3
£30.00
Chip required for refill material in HP Designjet 3D, HP Designjet Color 3D
Order Code: TMP-STRR1-CHP4
£30.00
Chip required for refill material in Dimension SST/BST 1200, SST 768, BST 768
Order Code: TMP-STRR2-CHP1
£15.30
Soluble Support Material Refill
Products Price Buy
Soluble Support Material Refill for 922cc cartridge for the following models:

Dimension SST/BST 1200es, SST/BST 1200, Fortus 250mc/200mc, uPrint, uPrint Plus, uPrint SE, uPrint SE Plus, HP Designjet 3D, HP Designjet Color 3D.

N.B. Requires appropriate chip to be ordered separately
Order Code: TMP-STRR1-SUP
£360.00
Soluble Support Material Chips
Products Price Buy
Chip required for soluble support material in SST 1200es, SST1200, SST 768, Fortus 200mc
Order Code: TMP-STRRS-CHP1
£15.30
Chip required for soluble support material in Fortus 250mc
Order Code: TMP-STRRS-CHP3
£15.30
Chip required for soluble support material in uPrint, uPrint Plus
Order Code: TMP-STRRS-CHP4
£30.00
Chip required for soluble support material in uPrint SE, uPrint SE Plus
Order Code: TMP-STRRS-CHP5
£30.00
Chip required for soluble support material in HP Designjet 3D, HP Designjet Color 3D
Order Code: TMP-STRRS-CHP6
£30.00
Breakaway Support Material Refill
Products Price Buy
Breakaway Support Material Refill for 922cc cartridge for the following models:

Dimension BST 1200es, BST 1200, BST 768.

N.B. Requires appropriate chip to be ordered separately
Order Code: TMP-STRR2-SUP
£345.00
Breakaway Support Material Chips
Products Price Buy
Chip required for breakaway support material in BST 1200, BST1200es, BST 768
Order Code: TMP-STRRS-CHP2
£15.30