TechSoft Logo
TechSoft UK Ltd., Falcon House, Royal Welch Avenue,
Bodelwyddan, Denbighshire, LL18 5TQ
Tel: 01745 535007 | Fax: 01745 535008 | Email:
01745 535007
CAD/CAM · Textiles · Machinery · Tools · Materials · Installations
Facebook Twitter YouTube Instagram
You are here: Home > Products > 3D Printing > 3D Printing Materials

3D Printing Materials

Please Select a 3D Printer:

Stratasys Mojo

Model Material
Model Material Spools and cassettes are not interchangeable so it is essential to select the right material for your machine. Material is supplied in sealed bags. ABS will absorb moisture from the atmosphere so always re-seal bags if part-used spools are to be stored. It is worth noting the quantity of material being ordered and the cost. The Mojo software predicts the amount of material needed so this figure can be used to determine individual part costs.
Mojo Quick Pack Model Print Engine (1311cc). Available in ivory, nectarine, red, yellow, olive green, blue, white, steel grey or black
Order Code: TMP-MJM-COL
Support Material
Most parts will use less support material than model material, but the proportion will vary depending on the model and the chosen build-strategy. One support spool for every three/four model spools should be about right.
Mojo Quick Pack Support Print Engine (1311cc)
Order Code: TMP-MJM-SUP
Model Bases
Models are created by building up from one of these disposable, slot-in bases. A new base should be used for every build to ensure the model has a firm grip and can’t move, curl or part-company with the base during the build. For economy, it is possible to position smaller parts to use a clean area of an already-used model base. Re-using bases is not recommended and can be a false economy. If a model does ‘lift’ then the build will almost certainly be lost.
24 Plastic Bases for Mojo (127 x 127mm)
Order Code: TMP-MJ-BASE