TechSoft
TechSoft UK Ltd., Falcon House, Royal Welch Avenue,
Bodelwyddan, Denbighshire, LL18 5TQ
Tel: 01745 535007 | Fax: 01745 535008 | Email: sales@techsoft.co.uk
01745 535007       sales@techsoft.co.uk
CAD/CAM · Textiles · Machinery · Tools · Materials · Installations
You are here: Products > 3D Printing > 3D Printing Materials

3D Printing Materials

Please Select a 3D Printer:


HP Designjet Color 3D

Model Material
Model MaterialSpools and cassettes are not interchangeable so it is essential to select the right material for your machine. Material is supplied in sealed bags. ABS will absorb moisture from the atmosphere so always re-seal bags if part-used spools are to be stored. It is worth noting the quantity of material being ordered and the cost. Catalyst software predicts the amount of material needed so this figure can be used to determine individual part costs.
Products Price Buy
Coloured Model Spool (655cc) for HP Designjet Color 3D.
Available in ivory, nectarine, red, yellow, olive green, blue, white, dark grey or black
Order Code: TMP-DJM-COL
£195.00
Pack of 5 Coloured Model Spools (655cc each) for HP Designjet Color 3D.
Available in ivory, nectarine, red, yellow, olive green, blue, white, dark grey or black
Order Code: TMP-DJM-5-COL
£940.00
Support Material
Spools and cassettes are not interchangeable, BST support must not be used in SST machines and vice versa, so carefully check your machine model when ordering. Most parts will use less support material than model material, but the proportion will vary depending on the model and the chosen build-strategy. One support spool for every three/four model spools should be about right.
Products Price Buy
HP Designjet Support Material (1 spool, 655cc)
Order Code: TMP-DJM-SUP
£194.00
Pack of 5 Support Spools (655cc each)
Order Code: TMP-DJM-SUP5
£940.00
Model Bases
Models are created by building up from one of these disposable, slot-in bases. A new base should be used for every build to ensure the model has a firm grip and can’t move, curl or part-company with the base during the build. For economy, it is possible to position smaller parts to use a clean area of an already-used model base. Re-using bases is not recommended and can be a false economy. If a model does ‘lift’ then the build will almost certainly be lost.
Products Price Buy
24 Plastic Bases for uPrint SE Plus (203 x 203mm)
Order Code: TMP-UPRP-BASE24
£120.00